Idle Commands

From Wiki

Revision as of 03:22, 29 December 2009 by Hyperup (Talk | contribs)
(diff) ←Older revision | Current revision (diff) | Newer revision→ (diff)
Jump to: navigation, search

Idle command contains a really important attribute which allows you to set a randomly appearance ratio to multiple idle commands. If you have up to 2 idle commands, you can then set the appearance ratio for your character to randomly act each motion by percentage rating.

Attribute Description Setting
ModeID ModeID allows you to divide the Idle commands into multiple behavior modes.

 Data Type: INT
Default: 0
Max: 9
Min: 1
OccurTimes Since idle command is a behavior that appears randomly, OccurTimes allow you to set the appearance ratio when you have up to two idle motions. But when you have only one idle command, you can leave it as default.

E.g. If you have three idle commands, each idle command's appearance ratio is calculated as below: 100 * (Command OccurTimes/Total OccurTimes) = Idle Command's Appearance Ratio.

Image:form4.jpg
Note: Idle01="2" Idle02="3" Idle03="5"		 Data Type: INT
Default: 1
Max: 100
Min: 1

Reference Tutorial: Avatar Breath, Avatar Idle and Avatar Persona All
Retrieved from "http://www.iclonewiki.com/index.php?title=Idle_Commands"